Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wolf Tooth Components GoatLink
$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Components ReMote Dropper Post Lever
$69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wolf Tooth Components ReMote Light Action Dropper Lever
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wheels Manufacturing Inc. Derailleur Hanger 65
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Trek ABP Convert Derailleur Hanger
$24.99
Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs Specifications: - Size: Rear drive side, Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut
SRAM Bottom Bracket Adaptor
$39.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
SRAM IS Disc Brake Adaptor
$22.00
Disc Brake Adaptors - Includes Stainless Bolts
SRAM Power Link Chain Connector
$17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$17.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
RockShox Maxle Lite Through-Axle
$51.99 - $66.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
RockShox Maxle Stealth Rear Thru-Axle
$32.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
Race Face Mud Crutch
$15.00
Mylar-laced woven elastic guard stretches around your fork to block mud/water as you ride.
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Problem Solvers Single Chainring Bolts - 6mm
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
OneUp Components Dropper Post Remote - V2 - 22.2 HB Clamp
$49.00
A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.
OneUp Components EDC Top Cap
$29.00
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
KMC Half Link Adapter
$1.65 - $2.75
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
KMC Missing Link 10-DLC
$16.00
- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs
FSA Headset Compression Plug
$14.00
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
FSA Pedal Washers
$7.00
Stainless steel pedal washers - Sold in pairs
Cane Creek 40-Series 52/30mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower
Cane Creek 40-Series 52/40mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing - 45 x 45 Degree
$11.00 - $25.00
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
absoluteBLACK HOLLOWcage Oversized Derailleur Pulley Cage for Shimano 9100 / 8000
$699.00
The absoluteBLACK's HOLLOWcage® Oversized Derailleur Pulley Cage for Shimano 9100 / 8000 features a revolutionary mono-plate design to provide quiet and precise shifting. - Designed for use with Shimano Dura Ace 9100 / 9150 / 9170 , and Ultegra 8000 / 8050 - Fits up to a 32T cassette - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise -Flexible cage design aligns better with the angle of the chain when using the higher gears of the cassette - HOLLOWcage uses abnormally large, bespoke, full ceramic bearings that make the pulleys incredibly stiff for greater shifting precision - Upper pulley features tall teeth to provide improved shifting precision
Zipp Bearing Kit: For 2005-2008 82/182 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings
Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Zipp Bearing Kit: For Rear 188 V9 Hubs
$40.00
Zipp Speed Weaponry Cartridge Bearings
Zipp Carbon Headset Spacer Set
$27.00
Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.
Zipp CeramicSpeed Bearing Kit: 30/60 88 Front Hub, 188 Rear Hub, and 30/60/S9 Rear Free Hub
$276.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp 88, 30 and 60 front hubs Zipp 188v8 rear hubs Zipp ALL free hub driver bodies - These 61803 bearings are not interchangable with the 77/177 hub 61803 bearings
Page 1 of 26 Next page